How to Drain a Dishwasher?

At some point, they may start to struggle with water draining. This problem may occur even with products of well-known manufacturers. So what is the reason for such a breakdown and what to do in such a situation?

How do you drain a dishwasher with standing water?

If you are not going to use your dishwasher for a long time, it is necessary to keep it entirely dry. How to dispose of water? It is not difficult at all:

  • Find the drain button;
  • Wait for the program to start working;
  • Unplug the machine;
  • Turn off the hose and remove the hose;
  • Prepare the cloth for the case of leakage;
  • Unscrew the trash filter and the salt cover;
  • Tilt the machine to the right side;
  • Then leave the machine with the door open to dry it well.

If the dishwasher is broken, then the above method is not workable. How to proceed in this case? Follow these instructions:

  • Disconnect the machine from power and the sewer system;
  • Then open the door, remove the filter and the lower basket;
  • Remove the cap of the salt reservoir; 
  • Then use a syringe and a pipe to pump out the water out of the dishwasher.

After that, do the same procedure with the filter.

You may need to make a few tries to make the trick work.

In such a simple way, it is possible to remove water from the machine almost to the last drop. Let the dishwasher to dry out and the very next day, you can safely continue with the repair.

Many users wonder should there remain some water in the dishwasher? Actually, yes! It is necessary for many rubber components. It is not good when they are completely drained. Some remaining water will prolong the durability of certain parts.

Why is there water in the bottom of my dishwasher?

Some dishwasher models face a problem of moisture accumulation. If there is water at the bottom of the dishwasher, there can be quite a few reasons for this malfunction. However, you should realize that the accumulation of moisture in the salt compartment or other places is most often due to service rules violation. It is quite simple to fix the problem. To do this, you only need to use this household appliance correctly.

But there are also other reasons for this issue. The most common are:

  • the too high position of the hose;
  • improper functioning of the pump;
  • incorrect operation of the liquid level sensor;
  • severe clogging of filters.

The main and most common reason why water remains in the dishwasher is the high position of the hose. As a rule, the problem is caused by its incorrect placement. To eliminate the malfunction, it is enough to correct its position. It is not difficult to connect the drain and water supply hoses to the device correctly.

The water may remain in the dishwasher because of a broken sensor, which is responsible for the liquid level in the device. You can fix the problem yourself. To do this, remove water from the device. Then you need to disconnect the pipe connected to the sensor. Thoroughly blow it off and check whether water remains or not. In most situations, this problem is easily solved by carrying out a few simple manipulations.

The pump can be also responsible for some water in the chamber. But in this situation, it is unlikely that you will sort out the breakdown by yourself. It is better to invite a specialist. Only a qualified technician will help you find out the exact reason for the problem, repair the pump, or completely replace it.

What causes a dishwasher not to drain?

You can handle many issues with the dishwasher on your own following instructions in the troubleshooting section of the manual. But the issues with the drain require detailed analysis. And the first thing to understand is the principle of a dishwasher operation.

The dishwasher operates similar to a washing machine. The only difference is that the water goes twice through the purification system. Each stage of the wash cycle is completed by water draining. If the dirty water is not removed, the machine cannot proceed to the next step of the program.

At first, there is a rough filtration, then a fine filtration follows. The average water consumption is 9-12 liters. Saving is achieved by constant purifying of the same water. After the filtering process, the water enters the pump, returns to the rocker arm and sprinklers.

At the end of the selected wash cycle, the water goes down and the drainage pump sends it to the sewer system. But it does not happen if any element of the drainage system does not function properly or is completely out of order.

So, why does the dishwasher stop and fail to drain the water? There can be different reasons for it:

  • Filter clogging;
  • The fold of the hose through which the water is drained;
  • Clogged drain system;
  • Blockage or breakdown of the drain pump;
  • Failures in the pressure switch;
  • Software module failure.

You can cope with the first three issues by yourself. But serious cases must be treated by a specialist. In case of a pump breakdown, replacement is required. A water level sensor, a pressure switch, can also break. As a result of a breakdown, the program module receives incorrect information about the internal pressure of the water. The broken part must be replaced with a new one. If this is not done, then the dishwasher will not work correctly. All these manipulations can be done only by qualified personnel from a service center.


What to do in case the dishwasher is not draining?

If you encounter trouble with water draining, you may try two possible solutions. You have to remove physical obstacles in the drainage system or to replace a broken part.

Every dishwasher instruction manual states that you should not disregard the simple rule. You should clean the dishes from leftover food before loading them into the chamber. Food remains are the main cause of drain problems.

So, if your machine is not draining the water, do not get upset. It can be the case of a simple clogging and not a malfunction. In such situations, first, check the filter for any obstacles. It is located at the lower part of the dishwasher. Perhaps it was the filter clogging that caused the water drain to stop. If you have checked the filter but the machine still does not drain the water, it is worth examining the drain hose.

Breakage or clogging of the drain hose can cause the device to work but without the ability to dispose of dirty water. The breakage check can be carried out visually. If there are any creases and kinks, they should be straightened and the dishwasher drained by running the drain program.

A dishwasher constantly contacts with water. Even in the idle state, the machine system has a little water, so experts recommend opening the door after washing. It will allow at least part of the water to evaporate and not to stagnate inside. And the main rule is to read the manual attentively and follow all recommendations of the manufacturer. With this approach you will prolong the durability of all household appliances.

Related Articles

Leave a Reply